Pure Clean PUCRC95 - Cleaning Suction Passage; Mopping Cloth Usage

www.PyleUSA.com
2
www.PyleUSA.com
15
5. Cleaning Suction Passage
Cleaning the suction passage, as marked in below gure, with soft cloth or
tool.
Note: Pay attention and avoid wetting the sensors.
6. Mopping Cloth Usage
A. Stick mopping cloth on mop plate x them
at the bottom of the robot, as shown in right
gure.
B. When the mopping cloth is dirty, please wash
and clean it. You can change a new one if
needed.
Note: Do not clean the appliance under water.