Pure Clean PUCRC95 - Charging Station Details; Remote Controller Functions

www.PyleUSA.com
6
PRODUCT COMPONENTS
Charging Station
Remote Controller
1. Digital display
2. Auto charging
3. Scheduling button
4. Direction buttons
5. ON/OFF
6. Mode selection button
7. Spot cleaning button
8. Time setting button
A. Install two AAA type batteries into the remote controller before use.
B. Remove the batteries if the remote controller will be left unused for
a long period.
C. If you use the remote controller near the charging station, the robot may
not recognize the command and may not work.
Signal receiver
Power light
Top cover
Charging poles
Infrared signal
transmitting window
Power supply socket