7
Setting the alarm & timers
EN
Setting the alarm & timers
Setting the alarm
1. Press the Alarm/Timer button and select ‘Alarm’ with the Tune dial to display the alarm
status screen.
2. Push the Tune dial to enter the alarm menu. You can scroll through six alarm options on the
bottom line of the display, while the top line displays their current setting. To change a setting,
push the dial, rotate it to make your selection and then push again to confirm the change.
Set alarm
Push the Tune dial to choose between ‘Alarm on’ (alarm
sounds) or ‘Alarm off’ (alarm does not sound). The
symbol on the screen indicates that the alarm is on.
Set time
Push the Tune dial to set the alarm time. Rotate to set the
hour then push to confirm. Repeat to set the minutes.
Set days
Push the Tune dial to set the days that the alarm sounds.
Choose between: Once only (alarm does not repeat),
Daily (every day), Weekday (Monday to Friday), Weekend,
Saturday or Sunday.
Set alarm mode
Push the Tune dial to choose between: DAB, FM or Tone.
Select station
If you’ve set alarm mode as DAB or FM you can choose
‘Select station’ and choose a DAB station or an FM preset
and push the Tune dial to confirm. Last tuned tunes to
the most recent FM station.
Alarm volume
If the alarm mode is set to DAB or FM, push the Tune dial
to change the alarm volume. Rotate the Tune dial left to
decrease the alarm volume and right to increase it then push
to confirm.
Cancelling a sounding alarm
To cancel a tone alarm push the Tune dial or Standby button.
To cancel a radio alarm press any button.
Note: A sounding alarm will switch off after one hour unless you cancel it.
BTcP[Pa\
0[Pa\^UU
BTcSPhb
3PX[h
BTc\^ST
301
BTccX\T
&)
0[Pa\e^[d\T
BT[TRcbcPcX^]
112APSX^!
To Next Page
Loading...
Need help?
General
