PURE Evoke H3 - Digital Radio Operation; Listening to Digital Radio Broadcasts; Changing Digital Radio Stations

6
Rear connections
x inAu
Input for supplied
mains adapter only
3.5mm output for
stereo headphones
Analogue stereo
input for auxiliary
cables
Micro USB
connector for
software updates
Setting up your Evoke H3
To set up your Evoke H3:
1. Unclip the aerial and fully extend it.
2. Connect the supplied mains adapter to the input on the back of your Evoke H3.
3. Plug the mains adapter into the mains supply.
>
+
–
5.5V DC 1A
Aux in
+
–
5.5V DC 1A Aux in
5.5V DC 1A
+
–
5.5V DC 1A
Aux in