EasyManuals Logo

PURE SIESTA iDock User Manual

PURE SIESTA iDock
88 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
9
EN
B]^^iT()$&
To snooze an alarm
When an alarm is sounding press the Select/Snooze button or the /+ buttons to silence
the alarm for ten minutes (the default snooze time). The remaining time left until the alarm
sounds again is shown at the bottom of the display.
Setting the Alarms
Siesta iDock has four alarms. When activated, an alarm either switches the radio on (if in
standby) and tunes to a DAB or FM radio station, activates and plays your iPod/iPhone (if
docked) or sounds a beeping alarm tone.
How to set an alarm
1. Press and hold the Alarm button (1-4) that you wish to store the alarm to. This will
start the alarm setup.
4
0[Pa\#BTcd_
0[Pa\>]
2. Using the +/ and Select buttons, set the following options for your alarm:
On/Off Switch the alarm on or off
On time Set the time you want the alarm to start (hours:mins)
Source Choose DAB, FM, iPod or tone as the sound source you want to
use for the alarm
Last Used/ For DAB and FM source, choose a station for the alarm to play.
Preset ‘Last Used’ will tune to the last station received by the radio.
‘Preset’ lets you select one of your saved stations.
Once The alarm will sound at the time you have selected and not
repeat.
Daily Every day
Weekdays Monday to Friday, every week
Weekends Saturday and Sunday only
Finally, adjust the volume level for the alarm (represented by a bar on-screen) using the +/−
buttons and Select to confirm.
Thats it! You can see which alarms are currently switched on by looking at the numbered
alarm icons on the screen.
For example:
APSX^!
0\hbcTahc^dac
Alarm 1 is
currently set

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the PURE SIESTA iDock and is the answer not in the manual?

PURE SIESTA iDock Specifications

General IconGeneral
Radio typePortable
Tuner typeDigital
FM band range87.5 - 108 MHz
Preset stations quantity30
Number of built-in speakers2
Subwoofer driver diameter (imperial)2 \
Display typeLCD
Display digits16 digits
Integrated clockYes
Product colorBlack
I/O ports1x PowerPort
DC-in requirements9V
Dimensions (WxDxH)180 x 166 x 66 mm
Power requirementsAC 100 - 240 V
Connectivity technologyWired
Headphone outputs1
Headphone connectivity3.5 mm
Power consumption (standby)0.6 W
Power consumption (typical)2.2 W
DABBand III, 174 - 240MHz

Related product manuals