Need help?Do you have a question about the PureLink CSW100 and is the answer not in the manual?
General| HDCP | Yes |
|---|---|
| Type | AV transmitter & receiver |
| Material | Plastic |
| Certification | CE, WEEE |
| Product color | Black |
| Maximum resolution | 1920 x 1080 pixels |
| Supported video modes | 720p, 1080i, 1080p |
| Audio formats supported | MP1, MP2, MP3 |
| Maximum transfer distance | 30 m |
| Supported graphics resolutions | 1600 x 1200 (UXGA), 1920 x 1080 (HD 1080) |
| Consumer Electronics Control (CEC) support | No |
| HDMI in | 1 |
| USB version | 2.0 |
| USB connector type | Micro-USB |
| Number of HDMI outputs | 2 |
| Input current | 1 A |
| AC input voltage | 100-240 V |
| Operating voltage | 5 V |
| AC input frequency | 50 - 60 Hz |
| Frequency | 5000 MHz |
| Operating temperature (T-T) | 0 - 40 °C |
Weight and Dimensions| Receiver dimensions (WxDxH) | 83 x 84.9 x 13.5 mm |
|---|
Connects source to transmitter and receiver to display using HDMI cables.
Connects the power adapters to both transmitter and receiver units.
Initiates pairing between the transmitter and receiver units using the MODE button.
Guides users through the process of pairing the transmitter and receiver units.
Details steps to take when the wireless connection fails.
To Next Page
