Need help?Do you have a question about the PureLink CSW110 and is the answer not in the manual?
General| Category | Extender |
|---|---|
| Model | CSW110 |
| Type | HDMI Extender |
| Signal Type | HDMI |
| Input | 1 x HDMI |
| Output | 1 x HDMI |
| Max Resolution | 1080p |
| Connector Type | HDMI |
| Power Supply | 5V DC |
Connects HDMI IN of transmitter to source and HDMI OUT to display for loop-through.
Connects the HDMI OUT of the CSW110 receiver to a display device.
Connects IR emitter to transmitter and receiver to source for remote control.
Connects DC 5V1A power adapter to the CSW110 transmitter's MicroUSB port.
Connects DC 5V1A power adapter to the CSW110 receiver's MicroUSB port.
Presses MODE keys on both receiver and transmitter to establish wireless connection.
Ensures AC voltage compliance, correct adapter usage, and optimal placement for signal transmission.
Guides through the process of pairing the transmitter and receiver via the MODE button.
Details how to properly install and use the IR emitter and receiver for remote control extension.
Declares compliance with EU Radio Emission Directive (RED) 2014/53/EU.
Provides guidance on proper disposal of electronic equipment according to EU directives.
To Next Page
