Need help?Do you have a question about the PureLink PT-E-HD10 and is the answer not in the manual?
General| Category | Extender |
|---|---|
| Model | PT-E-HD10 |
| Brand | PureLink |
| Input | HDMI |
| Output | HDMI |
| Max Resolution | 4K@60Hz (4:2:0) |
| HDCP Support | Yes |
| Type | HDMI over HDBaseT Extender |
| Audio Formats Supported | Dolby TrueHD, DTS-HD Master Audio |
| Connectors (Transmitter) | HDMI, RJ45 |
| Connectors (Receiver) | HDMI, RJ45 |
Details the front panel components of the transmitting unit (TX), including EDID SELECT, HDMI IN, IR-RX, and IR-TX sockets.
Details the rear panel components of the transmitting unit (TX), including DC 5V power input and SIGNAL OUT.
Details the front panel components of the receiving unit (RX), including HDMI OUT, SIGNAL LEVEL, IR-RX, and IR-TX sockets.
Details the rear panel components of the receiving unit (RX), including DC 5V power input and SIGNAL IN.
Explains the IR blaster and receiver components used for IR signal extension and their respective sockets.
Defines the pinout for IR signal, grounding, and power on the IR blaster and receiver earphone jacks.
To Next Page
