Purelogic SMC4-4-16A16B User Manual

SMC4-4-16A16B. Four-axis motion controller
Edition of 03.08.2016
9
www.purelogic.ru8 (800) 555 63 74
Directions: when Return to machinery XYZ direction, either positive or negative.
Return speed: the speed of returned to the Mechanical point and the knife point.
Above Input pin inputs corresponding to 8 controllers, Can arbitrarily designated as the current limit input pin.
Document Management
Click on «File Manager» icon to the below of the list of files into the interface, you can add new files, delete files, modify the file.
Click on the specified file will enter the following interface:

Purelogic SMC4-4-16A16B Specifications

General

Brand	Purelogic
Model	SMC4-4-16A16B
Category	Controller
Language	English