Need help?Do you have a question about the PVR EU 205 and is the answer not in the manual?
Provides essential information for correct pump operation and ordinary servicing for safety and preventing improper use.
Details the rotary vane vacuum pumps, their capacity, lubrication, and cooling system features.
Specifies the intended applications for the pumps, including vacuum ranges and operating temperatures.
Outlines prohibited uses, such as sucking liquids or dangerous gases, and installation in explosive environments.
Details necessary protections against dust, liquids, and advice on pressure switches for automatic stop.
Lists useful accessories available for pump installation and operation, such as filters and gauges.
Presents diagrams showing pump dimensions and identifies key components with their respective labels.
Provides detailed technical specifications including capacity, vacuum, motor power, sound level, and oil data.
Warns about high pump surface temperatures and the need for protection to avoid burns.
Addresses oil mist in discharge air and proper disposal of used oil according to regulations.
Advises against contact with the pump inlet port during operation and the need to introduce air before interventions.
Warns that the pump tank is pressurized and advises against opening plugs during operation.
Stresses that maintenance must be performed by skilled personnel with the pump stopped and properly isolated.
Highlights risks from live electrical parts and mandates skilled personnel for connections, complying with standards.
Warns about fire risks due to improper use or lack of maintenance and specifies appropriate extinguishers.
Instructs on proper lifting procedures using designated eyebolts and suitable equipment for pump weight.
Guides on checking the packing for damages upon receipt and inspecting pump components.
Provides guidelines for storing the pump without oil, protected from atmospheric agents within a specific temperature range.
Details the assembly process, including motor installation and checking coupling alignment.
Explains how to adjust the manual selector switch to change the pump's working vacuum range.
Specifies requirements for pump installation location, emphasizing protection, accessibility, and ventilation.
Guides on connecting the pump to the chamber using pipes of the same diameter and flexible fittings.
Provides instructions for piping discharge air, including maximum length and ensuring a descending slope.
Details electrical connection requirements, including compliance with standards and checking motor rotation direction.
Outlines the procedure for initial pump commissioning, including oil filling and level checks.
Offers advice on operating the pump, including pre-heating at low temperatures and avoiding frequent stop-starting.
Explains how to handle water vapour suction, including pre-operation heating and post-operation running.
General precautions before maintenance, and a table of periodic servicing operations for pump efficiency.
Provides a step-by-step guide for changing the pump's lubricating oil, including safety precautions.
Details the procedure for replacing the elastic coupling element, emphasizing safety during motor removal.
Explains how to replace dirty exhaust filters to prevent overheating and potential oil ignition.
Recommends contacting the service center for pump overhaul, involving complete disassembly and part replacement.
Identifies essential spare parts for regular maintenance, marked with 'R' and 'G' in the exploded view list.
Instructs on the necessary information to provide when ordering spare parts for the pump.
General| Model | PVR EU 205 |
|---|---|
| Power | 200 W |
| Frequency | 50 Hz |
| Inlet/Outlet Size | 1 inch |
| Category | Water Pump |
| Voltage | 230 V |
To Next Page
