ww w.PyleUSA.com
8
INSTALLATION
This amplier comes complete with mounting hardware, if the unit is used in the
line level (high impedance) mode, it is recommended to use gold plated RCA
connection cables with the length as short as possible and mount the unit as
close as possible to the receiver. This will lower the chance of stray magnetic pick
up that may cause noise in the system.
1. Choose a suitable location.
2. Check the clearance behind and above the mounting area.
3. Wire unit according to the proper wiring digram.
4. Using the hardware provided, attach the unit to mounting surface.
To Next Page
Loading...
