3
PLMRMBT5B / PLMRMBT5S
• One Piece 2 Channel Marine Power Amplier
• One Piece iPhone / Android Phone Waterproof 3.5mm Stereo
to RCA Adaptor
• One Piece Marine Grade Bluetooth Flush Mounted Controller
PLMRMBT7B / PLMRMBT7S
• One Piece 4 Channel Marine Power Amplier
• One Piece iPhone / Android Phone Waterproof 3.5mm Stereo
to RCA Adaptor
• One Piece Marine Grade Bluetooth Flush Mounted Controller
Installation Precautions
Before you drill or cut any holes, investigate your vessel’s layout very
carefully. Take special care when you work near the gas tank, fuel lines,
hydraulic lines and electrical wiring.
Never operate the amplier when it is unmouned. Attach all audio
system components securely to prevent damage, especially in an
accident.
Do not mount this amplier when wire connections are unprotected in a
pinched condition, in contact with any metal surfaces in your marine
vessel, or likely to be damaged by nearby objects.
Before making or breaking power connections in your system, discon-
nect the marine vessel battery. Conrm that your head unit or other
equipment is turned off while connecting the input jacks and speaker
terminals. If you need to replace the power fuse, replace it only with a
fuse identical to that supplied with the amplier, Using a fuse of a
dierent type or rating may result in damage to your audio system or
your amplier which is not covered by the manufacturer ’s warranty
Don’t misuse the level control!
Do not mistake the input level control for a volume control! It is
designed ONLY to match the output level of your audio source to the
input level of your amplier. Do not adjust this input level to maximum
unless your input level requires it. Ignoring these instructions will result
in an input overload to the amplier, and excessive audio distortion. It
can also cause the protection circuit to engage.
To Next Page
Loading...
Need help?
General
