Pyle PSLSW4 User Manual

www.PyleUSA.com
3
PSLSW6 Front and Back Panels
OPERATION
1. Speakers ON/OFF Button
Press button to turn ON all speaker pairs. Press again button out to turn o.
2. Amplier A/B Selector Button
Press button to select amplier A and B
3. Volume Controls
Turn the control knob clockwise to increase the volume and counter-clockwise
to decrease or o.
4. Speaker Connections
The control center divides the power from your receiver/amplier dierently to
its speaker terminals. (This is especially noticeable when you connect only one
pair of speakers. If you connect more than one pair of speakers, see “Impedance
Chart" on page 6 to selector the best terminals to connect. ) For the best
performance, make the connections based on how frequently you use each
set of speakers.
Cautions: To avoid damaging your speakers or receiver/amplier:
• Be sure your receiver/amplier's power is turned o before you make the
connections.
• Never let the speaker wire's bare ends touch each other or adjacent terminals
on the control center.
• Do not connect more than one pair of speaker to each set of terminals.

Pyle PSLSW4 Specifications

General

Brand	Pyle
Model	PSLSW4
Category	Receiver
Language	English