Pyle PSLSW4 User Manual

www.PyleUSA.com
4
5. Amplier Connections
Connect the speaker output of your receiver or amplier (100 watts max. ).
If you are using a second amplier, connect it to the B amp terminal
Maximum Amplier input
• 100W RMS
• 150W AVG
Maximum Output per Speaker
• 18W RMS
• 50W AVG
Insert the speakers’ positive (+) wires in the positive terminals, and negative
(-) wires into the negative terminals, according to the respective L (left) and R
(right) terminals.
PSLSW4
PSLSW6
• 100W PEAK
• 4 or 16 OHM LOAD

Pyle PSLSW4 Specifications

General

Brand	Pyle
Model	PSLSW4
Category	Receiver
Language	English