Page 34
Contact SegenSolar (PTY) Ltd | e: info@segensolar.co.za | t: 08780 20663
Configuration-Sunsynk
1. Press Enter/Gear icon to go to setup
menu.
2. Press “Battery”.
3. Press “Shut Down” and Set
“Shut down” at 3%, “Low Batt” at
5%.
5. Tick “BMS_Err_Stop”.
4. Press “Batt type”. Choose battery
mode “Lithium”, input capacity,
charge/discharge current according to
battery number
To Next Page
Loading...
