Pylontech US3000C Product Presentation

Page 22
Contact SegenSolar (PTY) Ltd | e: info@segensolar.co.za | t: 08780 20663
2) Cable connection: Communication cable connection:
The one with empty Link Port 0 is the
Master Battery Module, Which is connected
to the Inverter, other batteries are slave
batteries.
1 Master Battery configure with maximum
15 Slave Batteries in one string.
Figure 12: Battery communication cable connection diagram
Installation

Pylontech US3000C Specifications

General

Battery Type	Lithium Iron Phosphate (LiFePO4)
Nominal Voltage	48V
Capacity	74Ah
Discharge Current (Recommended)	37A
Discharge Current (Maximum)	74A
Communication	CAN, RS485
Cycle Life	6000 Cycles @ 25°C
Operating Temperature	-10°C to 50°C
Scalability	Up to 16 units in parallel
Certification	CE, UN38.3