Pylontech US3000C Product Presentation

Page 34
Contact SegenSolar (PTY) Ltd | e: info@segensolar.co.za | t: 08780 20663
Configuration-Sunsynk
1. Press Enter/Gear icon to go to setup
menu.
2. Press “Battery”.
3. Press “Shut Down” and Set
“Shut down” at 3%, “Low Batt” at
5%.
5. Tick “BMS_Err_Stop”.
4. Press “Batt type”. Choose battery
mode “Lithium”, input capacity,
charge/discharge current according to
battery number

Pylontech US3000C Specifications

General

Battery Type	Lithium Iron Phosphate (LiFePO4)
Nominal Voltage	48V
Capacity	74Ah
Discharge Current (Recommended)	37A
Discharge Current (Maximum)	74A
Communication	CAN, RS485
Cycle Life	6000 Cycles @ 25°C
Operating Temperature	-10°C to 50°C
Scalability	Up to 16 units in parallel
Certification	CE, UN38.3