Pylontech US3000C Product Presentation

Page 23
Contact SegenSolar (PTY) Ltd | e: info@segensolar.co.za | t: 08780 20663
2) Cable connection: Ground cable connection:
1) Based on metal directly touch between the module’s surface
and rack’s surface. If using painted rack, the corresponding
place shall remove the painting.
2) Install a grounding cable to the grounding point of the
modules.
Figure 13: Battery rack
Figure 14: Battery grounding point
Installation

Pylontech US3000C Specifications

General

Battery Type	Lithium Iron Phosphate (LiFePO4)
Nominal Voltage	48V
Capacity	74Ah
Discharge Current (Recommended)	37A
Discharge Current (Maximum)	74A
Communication	CAN, RS485
Cycle Life	6000 Cycles @ 25°C
Operating Temperature	-10°C to 50°C
Scalability	Up to 16 units in parallel
Certification	CE, UN38.3