Pylontech US3000C Product Presentation

Page 26
Contact SegenSolar (PTY) Ltd | e: info@segensolar.co.za | t: 08780 20663
Note:
1) After the battery module is powered on,
the soft-start function takes 3 sec to
activate. Battery is ready to have a high-
power output after soft-start operation is
finished.
2) During capacity expansion or
replacement, when paralleling different
SOC/voltage of modules together, please
maintain the system in idle for ≥15mins or
till the SOC LEDs becomes similar(≤1dot
difference) before normal operation.
Figure 18: Group batteries power on process
1) Power on:
Power On/Off

Pylontech US3000C Specifications

General

Battery Type	Lithium Iron Phosphate (LiFePO4)
Nominal Voltage	48V
Capacity	74Ah
Discharge Current (Recommended)	37A
Discharge Current (Maximum)	74A
Communication	CAN, RS485
Cycle Life	6000 Cycles @ 25°C
Operating Temperature	-10°C to 50°C
Scalability	Up to 16 units in parallel
Certification	CE, UN38.3