Pylontech US3000C Product Presentation

Page 32
Contact SegenSolar (PTY) Ltd | e: info@segensolar.co.za | t: 08780 20663
Configuration-Victron
1. When connected to the
battery, the color control
can automatically identify
“Pylontech”
2. Go to settings,
open “DVCC”
4. Go to settings, open “ESS”
5. Choose suitable
operation “mode”
6. If you choose
“Optimized”, please set
minimum SOC at 10%
or 5%.
7. Connect inverter
to host computer
3. Switch on “DVCC”
8. The host computer (VE
configure) settings can be
referred at
Victron website:
https://www.victronenergy.com
/live/battery_compatibility:pylo
ntech_phantom

Pylontech US3000C Specifications

General

Battery Type	Lithium Iron Phosphate (LiFePO4)
Nominal Voltage	48V
Capacity	74Ah
Discharge Current (Recommended)	37A
Discharge Current (Maximum)	74A
Communication	CAN, RS485
Cycle Life	6000 Cycles @ 25°C
Operating Temperature	-10°C to 50°C
Scalability	Up to 16 units in parallel
Certification	CE, UN38.3