Pyronix ATLAS 8 - Central Monitoring Station Telephone Number; Second Telephone Number; Customer Account Code; Downloading Access Code

Rins171 Issue 6 Page 23
11.12 Central Monitoring Station Telephone Number
Enter HQWHUVHTXHQFH enter the telephone number. (Up to 16 digits)
By pressing the a "," is displayed and a 2 second pause during the number dial will be inserted.
Press
to store entry.
A number consisting of 16 digits will be stored automatically when the last digit is entered.
11.13 Central Monitoring Station Second Telephone Number
Enter
HQWHUVHTXHQFH enter the telephone number. (Up to 16 digits)
By pressing the a ", " is displayed and a 2 second pause during the number dial will be inserted.
Press
to store entry.
A number consisting of 16 digits will be stored automatically when the last digit is entered.
11.14 Customer Account Code (Issued by Central Monitoring Station)
Enter
HQWHUVHTXHQFH followed by the 4 digit code.
e.g. 4 digit
11.15 Downloading Access Code
Enter
HQWHUVHTXHQFH followed by the 4 digit code.
11.16 Reporting Codes
11.16.1 Zone Alarm Reporting Codes
Enter
HQWHU VHTXHQFH followed by 2 digits for each alarm zone. To disable an event insert blanks by
pressing the
key in place of the two digits.
Examples Alarm zone 1
Alarm zone 2
Alarm zone 3
Alarm zone 4
Alarm zone 5
Alarm zone 6
Alarm zone 7
Alarm zone 8
For example to program alarm zone reporting codes 68 69 and 71 to zones 2, 4 and 7 respectively the following would
be entered:
To use HEX codes, use the
key to select the character required and the key to accept.
Reporting codes are automatically stored after the 16th key press.