Rins171 Issue 6 Page 31
15 COMMUNICATION PROGRAMMING
Programmable Outputs
Programmable Output 1 Default Off
Programmable Output 2 Default Off
System Option 1 1 Default - End of line
2 Default - User Log Re-set
disabled
3 Default - Tone Dial
4 Default - Internal sounder
only on tamper activation
System Option 2 1 Default - 24 hour test dial
2 Default - no-dial in
3 Default - Standard filters
4 Default - Audible P.A.
System Option 3 1 Default - User NVM reset
2 Default - Open zones not displayed
3 Default - No alarm in line fail
4 Default - Telephone line monitoring off
System Option 4 1 Default – No bell squawk
2 Default – Bell time mins
3 Default – AC fail warning
4 Default - Spare
No. of Re-Sets Default - Continuous
Tel. No. 1
Tel. No. 2
Customer account
code
Download access
code
To Next Page
Loading...
Need help?
General
