Pyronix Enforcer 32WE Setup Guide

18
Using Magnetic Contact 1 on a window
The MC1-WE has an extra input incorporated that can be used for external contacts or sensors.
The jumper pins ‘Z’ and ‘T’ should both be disabled when these are used.
Recommended maximum cable length of 10m
Detection point
External Input & Tamper Input
Printed Circuit Board
Back view of the MC1-WE
Tamper Switch
Using Magnetic Contact 1 (S1)
To enable Magnetic Contact 1 you must remove the
jumper link from the S1 enable pins:
Door
Door Frame
Reed Switch
S1
S1 Enable
Learn
S2 Enable
Z T
Test Result
T
C
Z
WINDOW
Contact
Magnet
TAMPER
Tamper
Enable/
Disable
Zone
Enable/
Disable
Magnetic
Contact 1
Enable/
Disable
Learn
Button
Status LEDs
ZONE
S1
S1 Enable
Learn
Z T
Test Result
T
C
Z
Example:
Universal Transmitter
T
C
Z
Z T
T
T
N / C
Door
Contact
/ Sensor
+
-
S1
S1 Enable
Learn
Z T
Test Result
T
C
Z
CR2 Battery
CR2 Battery
If the battery needs to be replaced, the
correct battery type (CR2) must be
installed
RED BLUE GREEN
RED BLUE GREEN
RED BLUE GREEN
RED BLUE GREEN
RED BLUE GREEN
MC1-WE
WHITE
3mm ABS, 0.4mm HDPE in Lens Area
868MHz, FM Transceiver Narrow Band
Fully Encrypted Rolling Code
300m Free Space
Three LED Combinations
(RSSI, Battery Status and Alarm)
1 x MC1-WE
2, Side and End
1 External Input & 1 External Tamper Input
3.6V 2.2Ahr AA Lithium Battery
Up to 2 Years
Front+Optional Rear Tamper
-20°C to 50°C
-10°C to 50°C
Model:
Colour:
Casing:
Transmission Frequency:
Transmission Method:
Transmission Range:
Indication:
Reed Switch:
Detection Points:
Detection Inputs:
Battery:
Battery Life:
Tamper Switch:
Storage Temperature:
Operating Temperature:
Back view of the MC1-WE
Tamper Switch
Using Magnetic Contact 1 (S1)
To enable Magnetic Contact 1 you must remove the
jumper link from the S1 enable pins:
Door
Door Frame
Reed Switch
S1
S1 Enable
Learn
S2 Enable
Z T
Test Result
T
C
Z
WINDOW
Contact
Magnet
TAMPER
Tamper
Enable/
Disable
Zone
Enable/
Disable
Magnetic
Contact 1
Enable/
Disable
Learn
Button
Status LEDs
ZONE
S1
S1 Enable
Learn
Z T
Test Result
T
C
Z
Example:
Universal Transmitter
T
C
Z
Z T
T
T
N / C
Door
Contact
/ Sensor
+
-
S1
S1 Enable
Learn
Z T
Test Result
T
C
Z
CR2 Battery
CR2 Battery
If the battery needs to be replaced, the
correct battery type (CR2) must be
installed
RED BLUE GREEN
RED BLUE GREEN
RED BLUE GREEN
RED BLUE GREEN
RED BLUE GREEN
MC1-WE
WHITE
3mm ABS, 0.4mm HDPE in Lens Area
868MHz, FM Transceiver Narrow Band
Fully Encrypted Rolling Code
300m Free Space
Three LED Combinations
(RSSI, Battery Status and Alarm)
1 x MC1-WE
2, Side and End
1 External Input & 1 External Tamper Input
3.6V 2.2Ahr AA Lithium Battery
Up to 2 Years
Front+Optional Rear Tamper
-20°C to 50°C
-10°C to 50°C
Model:
Colour:
Casing:
Transmission Frequency:
Transmission Method:
Transmission Range:
Indication:
Reed Switch:
Detection Points:
Detection Inputs:
Battery:
Battery Life:
Tamper Switch:
Storage Temperature:
Operating Temperature:
Back view of the MC1-WE
Tamper Switch
Using Magnetic Contact 1 (S1)
To enable Magnetic Contact 1 you must remove the
jumper link from the S1 enable pins:
Door
Door Frame
Reed Switch
S1
S1 Enable
Learn
S2 Enable
Z T
Test Result
T
C
Z
WINDOW
Contact
Magnet
TAMPER
Tamper
Enable/
Disable
Zone
Enable/
Disable
Magnetic
Contact 1
Enable/
Disable
Learn
Button
Status LEDs
ZONE
S1
S1 Enable
Learn
Z T
Test Result
T
C
Z
Example:
Universal Transmitter
T
C
Z
Z
T
T
T
N / C
Door
Contact
/ Sensor
+
-
S1
S1 Enable
Learn
Z T
Test Result
T
C
Z
CR2 Battery
CR2 Battery
If the battery needs to be replaced, the
correct battery type (CR2) must be
installed
RED BLUE GREEN
RED BLUE GREEN
RED BLUE GREEN
RED BLUE GREEN
RED BLUE GREEN
MC1-WE
WHITE
3mm ABS, 0.4mm HDPE in Lens Area
868MHz, FM Transceiver Narrow Band
Fully Encrypted Rolling Code
300m Free Space
Three LED Combinations
(RSSI, Battery Status and Alarm)
1 x MC1-WE
2, Side and End
1 External Input & 1 External Tamper Input
3.6V 2.2Ahr AA Lithium Battery
Up to 2 Years
Front+Optional Rear Tamper
-20°C to 50°C
-10°C to 50°C
Model:
Colour:
Casing:
Transmission Frequency:
Transmission Method:
Transmission Range:
Indication:
Reed Switch:
Detection Points:
Detection Inputs:
Battery:
Battery Life:
Tamper Switch:
Storage Temperature:
Operating Temperature:
MC1-WE
Wireless magnetic contact/universal transmitter
with 1 reed, 1 input & tamper

Pyronix Enforcer 32WE Specifications

General

Brand	Pyronix
Model	Enforcer 32WE
Category	Security System
Language	English