Pyronix STERLING 10 User Manual

Sterling 10 User Manual
Page: 14 RINS415-9
 Enter the new 4-digit new code twice as per the display prompts. Three tones will be heard an
acceptance of each command. A single low tone indicates that the procedure hasn’t been
completed and the process will need to be started again.
Changing The Limited User Code
LCD Keypad
 Press the key
 Then the key and scroll to ‘CHANGE CODES’
 Press the key to accept.
 Enter your 4-digit Master User Code (Default 1234).
 Enter any number from 2 to 7 to select the user code you wish to add/change.
 For example, to add User 2, press the key:
 Enter the new 4-digit new code twice as per the display prompts. Three tones will be heard an
acceptance of each command. A single low tone indicates that the procedure hasn’t been
completed and the process will need to be started again.
ICON Keypad
 Press the Ckey
 Followed by the key.
 Enter the 4-digit Master Code.
 Enter any number from 2 to 7 to select the user code you wish to add/change.
 Enter the new 4-digit new code twice as per the display prompts. Three tones will be heard an
acceptance of each command. A single low tone indicates that the procedure hasn’t been
completed and the process will need to be started again.
B
D
E
F
Ente
r
Func
Ente
r
Func
A
A
B
C
Y
Z
S
T
U
V
W
X
B
D
E
F
C
G
H
I
D
J
K
L
M
N
O
P
Q
R
Ente
r
SPACE
A
RM
Func
P.A.
Fire
STERLING
CHANGE CODES
PRESS USER 1-7

Pyronix STERLING 10 Specifications

General

Brand	Pyronix
Model	STERLING 10
Category	Control Panel
Language	English