Pyronix V2 TEL User Manual

V2 TEL User Manual
Page: 11 Pyronix Ltd
5.5 ADDITIONAL OUTPUT CONTROL [700]
The V2 TEL comes with 4 already built in outputs.
Press the [ or ] keys to scroll to
‘OUTPUT CONTROL’ or enter ‘[700]’.
Press t
Press M or N to select the PGM
number (up to 52) Press t
Press M or N to turn the output on
or off or select the number:
0 = Output off (default)
1 = Output on
Press t
700 – 704 for the on board V2 TEL outputs.
5.6 PLAY / RECORD ALARM VOICE MESSAGES [800]
Voice messages can be programmed for each input on the V2 TEL. The voice alarm
messages can be up to 12 sec long. At default there are no user recordings.
Press the [ or ] keys to scroll to
‘PLAY/REC ALARM VOICE
MESSAGES’ or enter ‘800’. Press
t
Press M or N to select which input
number (or enter the shortcut function
number see page 11) Press t
Press:
1 = To play a message
4 = To record
9 = To delete
Shortcut Function Numbers:
INPUTS BUILT IN V2TEL
801: Play/rec msg for input#1
802: Play/rec msg for input#2
803: Play/rec msg for input#3
804: Play/rec msg for input#4
805: Play/rec msg for input#5
806: Play/rec msg for input#6

Pyronix V2 TEL Specifications

General

Brand	Pyronix
Model	V2 TEL
Category	Security System
Language	English