CHAPTER 6: RECEIVING A CALL FROM THE V2 TEL
After alarm activation has occurred, the V2 TEL will call one or more of
the programmed telephone numbers.
Voice Alarm Transmission:
V2 TEL dials the programmed telephone number
The user answers the call
Voice Alarm Message is played
V2 TEL will ask for call acknowledgement code
The user will enter the required acknowledgement code to
acknowledge the call
A long beep is heard and the call will be finished
At the end of the long beep, If the ‘9’ key is pressed twice (99) a
remote control menu is entered (if enabled by the engineer).
To Next Page
Loading...
Need help?
General
