Page: 5
C H A P T E R 2 : K E Y P A D S / R E A D E R S
There are three different devices that may be used in the process of setting/unsetting the alarm
system; these are the main keypad, the external tag reader and the internal tag reader.
Control Panel Keypad
= Exit manager menu.
= Moves backwards to the previous menu
item.
= Enables chime and displays additional
information in the log.
= Moves forward in the log, scrolls between
options and enters the master manager menu.
= Not used.
= Directional buttons.
= Selects items and enters menus.
= Cancels items, resets the panel and
moves to next item in master manager menu.
The Internal Tag Reader
Tag Area (Where you present
your tag to arm/Unset)
Alert LED
Alarm LED
Tamper LED
Fault LED
Unset LED
The External Tag Reader
LEFT GREEN LED: Status indicator
(extinguishes after a couple of seconds)
RED LED: This can be programmed by your
engineer to illuminate when the alarm has
activated for example.
A
B
C
D
YES
NO
To Next Page
Loading...
