Page: 9
C H A P T E R 6 : U N S E T T I N G T H E A L A R M ( C O D E / T A G )
Ø Enter the building
Ø The Entry time will start
Ø Enter your user code
Or
Ø Present a valid tag
Ø The level set that the code is assigned
to will be Unset.
Ø Note: If ‘flexi-set’ is disabled (see
page 18) then the system will
automatically Unset that level set once
a valid user code or tag is presented.
UNSETTING USING A WIRELESS KEY-FOB
PLEASE NOTE: Unsetting with a key-fob will
only be allowed if your engineer has
enabled this.
Ø To unset via a key-fob. Press the
key
Ø The key-fob LED will start to flash
GREEN indicating that the system has
unset.
To Next Page
Loading...
Need help?
General
