Python 872 User Manual

Basic
Commands
(Direct
Access)
No
Ghost
LED's
on
Arm
Press
and
release
~
The
alarm arms, doors lock
(if connected),
and
the siren chirps
and
parking
I
ig
hts
flash once. The Arm
LED
and beeps
play
to confirm.
If
Valet
mode*
is
On,
the doors
lock
and the Arm
LED,
f
LED
and
a
fault
tone plays. Exit
Valet
mode
to arm the alarm normally.
If
a trigger
zone
fault
is
detected the
siren
chirps once
again
and the
remote will
emit a Trigger Zone Fault Report**,
the
Arm
LED,
f
LED
and
a fault
tone ploys.
To
Arm
and Panic
(cj)
Press
and
hold
D
The
alarm Arms (or
Locks
in
Valet) and, after 2 seconds, sounds
the siren
and
flashes the parking lights.
The
~ost
LED's
flash
and
siren tones
play
to confirm.
Press
the
~or()
button to stop the
output.
Disarm
~
Press
and
release
()
The alarm
disarms, doors unlock {if connected),
and
the siren chirps
and
parking lights flash twice.
The
Disarm
LED
and
beeps
play
to
confirm.
If
Valet
mode*
is
On,
the doors unlock
and
the Disarm
LED,
f
LED
and
fault tones
play.
An Alarm
Report**
will
replace the disarm output if the alarm
was
10
©
2009
Directed
Electronics.
All
rights reserved.

Python 872 Specifications

General

Brand	Python
Model	872
Category	Remote Starter
Language	English