Python 872 - Remote Start Features; Pit Stop and Key Takeover Modes

Remote
Start
Features
Pit
Stop
Mode
To
exit
vehicle
with engine running
The
system
keeps the engine running during short trips into the house
or convenience store.
To
perform
Pit
Stop:
1
.
With
the engine running,
set
the
parking brake and
release
the
foot brake.
2.
Press
the
{:}
button,
the
parking
lights will
turn
on
and
the
Re-
mote start
LED
and
On
tones
play
on the remote
control.
3.
Turn
the key to off, and
remove
it
from the ignition, the engine
continues running for
the
programmed runtime.
4.
Exit
the
vehicle
and
arm
the
alarm.
Note
Key
Takeover
When
you are ready to drive
The
system
keeps the engine running
until
the
vehicle
is
ready
to
be
driven.
To
perform Key Takeover:
1 .
Disarm
the
system and
enter
the
vehicle,
do
not step on
the
foot
brake.
2.
Insert
the
key,
turn
it to
the
run
position, and then
step
on
the
foot
brake,
the
remote start
then
turns
off.
3.
The
parking lights
turn
off to indicate remote start
is
off, and
then
28
©
2009
Directed Electronics.
All
rights reserved.