Entering Initial Installation Information I 64
NOTICE
• To install the product, you must obtain an installer membership instead of a general
membership.
• To join as an installer member, a special number is required. First check the special
number from the local dealer or service center.
2. Enter your ID and password in the login window. If you have no account, please join as a Member
3. Click the “Join Membership” link.
4. In order to join as a member, you must consent to the terms for personal privacy protection.
The terms have been prepared in accordance with applicable local laws.
If you do not agree to the terms, you cannot join as a member.
5. Enter the required information for registration.
8. The installation wizard runs automatically. Explain the terms for personal privacy protection to your
customer and obtain the consent to the terms with a signature.
6. After obtaining a membership, a completion message appears. Click the "Log In" button.
7. After login, the main installer page appears. After selecting the menu button at the upper left corner,
select Product → Installation.
[ Figure 7-5 : Installer in Page ]
NOTICE
• The optional items for company name and eamil address are necessary for quick contact
and response from the service center.
• Enter the number identified through a pre-contact in Special Number.
NOTICE
• The data collected during the installation process is used only for installation purpose.
• The consent and signature acquisition process proceeds according to the local laws.
We at Q CELLS are making the utmost effort to protect personal information
in accordance with the laws.
To Next Page
Loading...
Need help?
General
