Q-See QSD9004 - Log-In to Netviewer; Main Interface of Net-Viewer; Menu Column; Live

User Manual
27
6.2 Log-in to NetViewer
6.3 Main Interface of Net-viewer
6.3.1 Menu column
Menu column include [Live] menu, [Replay] menu and [Setup] menu.
6.3.1.1 Live
After Logging-in to system, system will enter into Live display (shown as Picture 6-3).
After webcam installs plug-ins, please select log-in language
(Chinese or English) and enter into password and click [Log-in]
button, and now you can view DVR remotely through NetViewer.
Please note default password is empty. System allows
Administrator to set new password as per instructions in section
5.2.6.2 - [Password set] menu. Note: If you want to delete old IE
webcam at DVR system update, run the command characters:
“regsvr32/u dvrocx.ocx”
After successful Log-in to Net-viewer, system will
enter into live display interface and connect to
audio/video feed automatically (shown as Picture 6-2).
Log in Net-viewer and show the interface as
follows
6.3.1 Menu column (Section 1 on Picture 6-3)
6.3.2 PTZ Control (Numbers 2, 3, 4 on Picture 6-3)
6.3.3 Live Play Control (Numbers 6 through 10 on
Picture 6-3)
Picture 6-2
Picture 6-3
Picture 6-1
(Section 1 on Picture 6-3)