User Manual
30
⑤ Setting
⑥ Host Info
6.3.2 PTZ Control
②.PTZ control: indicates focus, zoom and iris control of PTZ
③.Setting: this option allows you to setup PTZ parameters.
④.Invoke: Invoke PTZ settings
⑤.Clear：clears current PTZ parameters.
6.3.3 Live Play Control
⑥ On / Off Live display [ ]：When Live display status is “On”, Clicking the button closes Live display. When
“Off” clicking the button opens the Live display.
⑦.Capture [
]：Capture Screen image and save to PC as *bmp image.
⑧.Recording [
]：Operate DVR recording remotely
⑨Channel display [
]：The icons stand for Single Channel display, Quad Channel display, 3x3
Channel display and 4x4 Channel display respectively.
⑩.Volume control [
] Click or slide the control bar to adjust sound volume.
Picture 6-11
Click [setting] menu to enter into the menu interface
(shown as Picture 6-11);
Click […] button to preview net-viewer recording
saving path and screen capture saving path.
The menu also allows you to set a lower bandwidth for
Internet video transmission, set user password, turn
daylight saving time on/off, etc.
Click [Host Info.] to enter into the sub menu (shown as
Picture 6-12). Here you can check Usage rate of HDD,
available recording time, software version and MAC address.
Picture 6-12
(Numbers 2, 3, 4 on Picture 6-3)
(Numbers 6 through 10 on Picture 6-3)
To Next Page
Loading...
