Q-See QT SERIES Quick Start Guide

8
PICTURE 16
PICTURE 17
STEP 11. Check the box titled Enable.
STEP 12. Enter the camera’s information:
IP address: Shown on
CanYouSeeMe.org
Server Port: 85
User Name: admin
Password: 123456
STEP 13. Check the box titled Enable
and then click OK to return to the
Device Manager window.
Click Apply to save your cameras to your list
and then click Exit.
PICTURE 18

Q-See QT SERIES Specifications

General

Series	QT Series
Video Compression	H.264
Remote Viewing	Yes
HDMI Output	Yes
VGA Output	Yes
Motion Detection	Yes
Channels	4, 8, 16
Recording Resolution	1080p, 720p
Hard Drive Capacity	Up to 6TB
Mobile App Support	Yes
Network Connectivity	Ethernet