54 55
CHAPTER 7 REMOTE SURVEILLANCE
PICTURE 7-25
PICTURE 7-27
PICTURE 7-26
DOWNLOAD SIMPLE PORT FORWARDING PROGRAM
Download the FREE Simple Port Forwarding program from:
http://www.simpleportforwarding.com/download
STEP 1. Click on Download on Mirror 7 to download and install this program.
STEP 2. Once the program is installed,
go to the Windows Start Menu
(Windows icon in the lower left of
your monitor) and look for Simple
Port Forwarding in the program list.
Click on the program to launch it.
STEP 3. Once Simple Port Forwarding has launched, select your router from the list.
The default Router IP and Login information will automatically come up. If you have
previously changed the login information, then you will have to enter it manually
STEP 4. Click on “+” at the bottom to open the window allowing you to set your ports.
PICTURE 7-28
PICTURE 7-29
STEP 5. Click on ADD CUSTOM.
STEP 6. Input the required information:
Name: (You can name your DVR if you
wish)
Type: TCP
Start Port: 80
End Port:80
IP add: IP of DVR obtained in
Section 1.
Click on ADD
Repeat for port 6036.
To Next Page
Loading...
