Q'STRAINT QUANTUM User Manual

19
SYSTEM CHECKLIST
The following parts make up a complete QUANTUM® Securement System.
If any questions arise, call your nearest Q’STRAINT ® authorized dealer or office.
o QUANTUM® Securement System
o Basic QUANTUM® Mounting
Plate with Hardware (Grade 8)
The images of the Mounting
Plate illustrated in this manual
are a representation of the Basic
Mounting Plate. The Mounting
Plate will vary depending on the
Bus Configuration.
o Basic Supporting Plates
(Bus without Tapping Plate)
The images of the Supporting
Plates illustrated in this
manual are a representation
of the Basic Supporting Plates.
The Supporting Plates will
vary depending on the Bus
Configuration.
Secure
Release
ON
OFF
Master Switch Occupant Switch
Driver Interface
o Driver Interface o Reset Switch o Occupant Interface
Backrest and Occupant Securement (Shoulder and Lap Belt, ONLY for US) MUST be installed in conjunction with the
QUANTUM® Securement System.
o Backrest – US with Occupant Securement o Backrest – CA and UK
OR

Q'STRAINT QUANTUM Specifications

General

Brand	Q'STRAINT
Model	QUANTUM
Category	Automobile Accessories
Language	English