Q'STRAINT QUANTUM User Manual

45
PREVENTATIVE MAINTENANCE CHECKLIST
CHECK
Driver Interface,
Master Switch
“OFF”
Master Switch
“OFF”, Occupant
Switch Works
Master Switch
“OFF”, Occupant
Interface Disabled
Master Switch “OFF”,
2nd Occupant
Interface Disabled
Master Switch
“ON”, Cycle Unit
from Driver
Interface
Master Switch “ON”
or “OFF”, Occupant
Interface LED Light
“ON”
Master Switch
“ON”, Cycle Unit
from Occupant
Interface
Master Switch
“ON” or “OFF”,
2nd Occupant
Interface LED
Light “ON”
IMAGE WORKING
NOT
WORKING
FIXED COMMENTS
Master Switch
“ON”, Cycle
Unit from 2nd
Occupant
Interface
Secure
Release
ON
OFF
Master Switch
Occupant Switch
MAINTENANCE AND CARE COMMENTSDONE
Remove All Debris From Unit
ONLY use Soap and Water to Clean the QUANTUM®, Arm
Extensions and Backrest, then Rinse and Dry (Arms Fully
Extended)
Rub 3-in-One® Oil on Arm Extensions
(Do NOT use another brand)
Press Secure and center PSI scale between
QUANTUM® Arms. Once scale is secured, press
release.
Press Occupant Interface and center PSI Scale
between QUANTUM® Arms. Once scale is secured,
press Occupant Interface again.
OFF
Master Switch
Occupant Switch
Driver Interface
Driver Interface
Press 2nd Occupant Interface and center PSI Scale
between QUANTUM® Arms. Once scale is secured,
press 2nd Occupant Interface again.
Press Occupant Interface, when Rotational Arm moves from
vertical to horizontal position press Occupant Interface again
to stop Arm. When done, press Occupant Interface.
No Light

Q'STRAINT QUANTUM Specifications

General

Brand	Q'STRAINT
Model	QUANTUM
Category	Automobile Accessories
Language	English