Professional
FM Transceiver
41
FUNCTION MENU SETUP
View the scan list
Scan instructions
Select a channel with scan list by channel selector knob;1.
Press [ 2.
/
]
to access the menu.
Press [ 3.
/
]
to Scan and press [
MENU
] to select.
Press [ 4. /
]
to View List and press [
MENU
] to select.
Press [ 5. /
]
to view each member on the list.
If you set the priority scan, then the icon of priority list in the leftside, it refers that the member in
the priority 1 or priority 2 channel. In the scan list, you can not have multiple priority 1 or priority 2
channel.
If non priority scan, then will not show the priority icon.
When you start a scan, your radio cycles through scan list looking for voice activity. The LED blinks
red , and scan icon shows in the screen. while in scan mode.
There are two ways of initiating scan:
Manual Dial (Manual): Your radio scans all the channels/groups in your scan list. On entering ●
scan, your radio may, depending on the settings, the button scan on/off OR by the menu function
to start scan.
Auto Scan(Automatic): Your radio automatically starts scanning when you select a channel/group ●
that has Auto Scan enabled.
To Next Page