Qixiang D858 - Squelch Level (Analog); Power Level Settings

Professional
FM Transceiver
44
Setting the Squelch Level (Analog)
Setting the Power Level
The display shows Turn On. Press [ 6.
MENU
] to enable keypad tones. The display shows Keypad
Tone On. OR The display shows Turn Off. Press [
MENU
] to disable keypad tones. The display
shows Keypad Tone Off.
You can adjust your radio's squelch level to filter out unwanted calls with low signal strength or
channels that have a higher than normal background noise.
Settings: Normal is the default. Tight lters out (unwanted) calls and/or background noise.
However, calls from remote locations may also be ltered out.
Press the Squelch button to toggle squelch level between normal and tight.
1.Press [
MENU
] to access menu.
2 .Press [
/
]
to Utilities and press [
MENU
] to select.
3. Press [ /
]
to Radio Settings and press [
MENU
] to select.
4. Press [ /
]
to Squelch and press [
MENU
] to select and access sub-menu.
5. Choose either Tight or Normal and press [
MENU
] to select, Screen returns to the previous menu.
You can customize your radio's power setting to high or low for each channel.
Settings: High enables communication with radios located at a considerable distance from you.
Low enables communication with radios in closer proximity.
Press the Power Level button to toggle transmit power level between high and low.
ADVANCED OPERATIONS