A – Command Line Interface
Help Command
A-20 59226-00 B
S
Help Command
Displays a brief description of the specified command, its keywords, and usage.
Authority None
Syntax help [command] [keyword]
Keywords [command]
Displays a summary of the command given by [command] and its keywords. If you
omit [command], the system displays all available commands.
[keyword]
Displays a summary of the keyword given by [keyword] belonging to the
command given by [command]. If you omit [keyword], the system displays the
available keywords for the specified command.
all
Displays a list of all available commands (including command variations).
Examples The following is an example of the Help Config command:
SANbox #> help config
config CONFIG_OPTIONS
The config command operates on configurations.
Usage: config { activate | backup | cancel | copy | delete |
edit | list | restore | save }
The following is an example of the Help Config Edit command:
SANbox #> help config edit
config edit [CONFIG_NAME]
This command initiates a configuration session and places the current session
into config edit mode.
If CONFIG_NAME is given and it exists, it gets edited; otherwise, it gets
created. If it is not given, the currently active configuration is edited.
Admin mode is required for this command.
Usage: config edit [CONFIG_NAME]
To Next Page
Loading...
