A – Command Line Interface
Reset Command
59226-00 B A-35
A
Table A-6. Zoning Configuration Defaults
Parameter Default
InteropAutoSave True
DefaultVisibility All
DiscardInactive False
Table A-7. SNMP Configuration Defaults
Parameter Default
SNMPEnabled True
Contact <syscontact undefined>
Location <sysLocation undefined>
Description SANbox 1400 FC Switch
Trap [1-5] Address Trap 1: 10.0.0.254; Traps 2–5: 0.0.0.0
Trap [1-5] Port 162
Trap [1-5] Severity Warning
Trap [1-5] Version 2
Trap [1-5] Enabled False
ObjectID 1.3.6.1.4.1.1663.1.1.1.1.27
AuthFailureTrap False
ProxyEnabled True
To Next Page
Loading...
