A – Command Line Interface
Show Command
A-70 59226-00 B
S
version
Displays an introductory set of information about operational attributes of the
switch. This keyword is equivalent to the About keyword.
Examples The following is an example of the Show Chassis command:
SANbox #> show chassis
Chassis Information
-------------------
BoardTemp (1) - Degrees Celsius 23
PowerSupplyStatus (1) Good
HeartBeatCode 1
HeartBeatStatus Normal
The following is an example of the Show Domains command:
SANbox #> show domains
Principal switch is (remote): 10:00:00:60:69:50:0b:6c
Upstream Principal ISL is : 1
Domain ID List:
Domain 97 (0x61) WWN = 10:00:00:c0:dd:00:71:ed
Domain 103 (0x67) WWN = 10:00:00:60:69:50:0b:6c
The following is an example of the Show Fabric command:
SANbox #> show fabric
Domain WWN Enet IP Addr FC IP Addr SymbolicName
------ --- ------------ ---------- ------------
16 (0x10) 10:00:00:c0:dd:00:77:81 10.20.68.11 0.0.0.0 gui sb1 .11
17 (0x11) 10:00:00:c0:dd:00:6a:2d 10.20.68.12 0.0.0.0 sw12
The following is an example of the Show FDMI command:
SANbox #> show fdmi
HBA ID PortID Manufacturer Model Ports
-------- ------ --------------- ------- -----
21:01:00:e0:8b:27:aa:bc 610000 QLogic Corporation QLA2342 2
21:00:00:00:ca:25:9b:96 180100 QLogic Corporation QL2330 2
To Next Page
Loading...
Need help?
General
