A – Command Line Interface
Show Command
A-76 59226-00 B
S
The following is an example of the Show Version command:
SANbox #> show version
*****************************************************
* *
* Command Line Interface SHell (CLISH) *
* *
*****************************************************
SystemDescription SANbox 1400 FC Switch
Eth0NetworkAddress 10.20.116.37 (use 'set setup system' to update)
MACAddress 00:c0:dd:07:02:17
WorldWideName 10:00:00:c0:dd:07:02:17
ChassisSerialNumber 0447000039
SymbolicName SB1400.116.37
ActiveSWVersion V5.0.1.2.0
ActiveTimestamp Mon Dec 12 22:44:25 2005
DiagnosticsStatus Passed
To Next Page
Loading...
