A – Command Line Interface
Show Setup Command
59226-00 B A-89
A
The following is an example of the Show Setup System command:
SANbox #> show setup system
System Information
------------------
Eth0NetworkDiscovery Static
Eth0NetworkAddress 10.20.11.32
Eth0NetworkMask 255.255.252.0
Eth0GatewayAddress 10.20.8.254
AdminTimeout 30
InactivityTimeout 0
LocalLogEnabled True
RemoteLogEnabled False
RemoteLogHostAddress 10.0.0.254
NTPClientEnabled True
NTPServerAddress 51.68.85.102
EmbeddedGUIEnabled True
To Next Page
Loading...
Need help?
General
