QNAP QSW-M3212R - Page 28

• Out-of-band: Allows users to access QSS through a dedicated management port without being
aected by network congestion or malfunction.
4. Congure the network management settings.
Setting Description
Automatically obtain IP & DNS If the network supports DHCP, the interface automatically obtains the
IP address and network settings.
Manually set the IP & DNS Manually assign a static IP address. You must specify the following
information:
• Fixed IP Address
• Subnet Mask
• Default Gateway
Note
The default gateway IP address for the switch is
optional.
• DNS
5. Click Save.
QSS saves the IP settings.
Updating the switch password
1. Log in to QSS.
2. Go to System > System Settings > Password .
3. Specify a new password.
Tip
Click
to make the password visible.
Setting User Action
Current password Specify the current password of the device.
New password Specify a password that contains 8 to 20 ASCII characters.
Conrm new password Reenter the new password.
4. Click Save.
QSS logs you out of the switch interface. You can access the switch with the new password.
Conguring time settings
Note
You must congure the system time correctly to ensure the following:
• When using a web browser to connect to the device or save a le, the displayed time of
the action is correct.
• Event logs reect the exact time that events occur.
QSW Managed Switches User Guide
QSS 27