EasyManua.ls Logo

QNAP QSW-M5216-1T - LED Behavior; System Status LEDs; 25 GbE SFP28 Port LEDs; 10 GbE RJ45 Port LEDs

QNAP QSW-M5216-1T
28 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
31 2
LED Status Description
System Status
Flashing green Device is booting.
Steady green Device is booted.
O -> ashing -> green Firmware update
O -> ashing -> green
Press reset button 5sec and release
for reset password
O -> green -> ashing
->green
Press reset button 10sec and release
for reset to default
Steady red Fatal error on the device
O Device is powered o
25GbE SFP28
Green (Left)
Link is operating at 25 Gbps,
ashing: active, o: no link
Amber (Right)
Link is operating at 10/1 Gbps,
ashing: active, o: no link
10GbE RJ45
Green (Left)
Link is operating at 10 Gbps,
lashing: active, o: no link
Amber (Right)
Link is operating at
5G/2.5G/1G/100Mbps,
ashing: active, o: no link
LED Behavior

Related product manuals