To Next PageTo Next Page
Need help?Do you have a question about the QNAP TL-D800S and is the answer not in the manual?
General| Hot-swap | Yes |
|---|---|
| Storage drive size | 2.5/3.5 \ |
| Total installed storage capacity | 0 TB |
| Number of storage drives supported | 8 |
| Supported storage drive interfaces | Serial ATA II, Serial ATA III |
| Display type | LCD |
| Fan diameter | 120 mm |
| Product type | HDD/SSD enclosure |
| Product color | Black, Grey |
| LED indicators | Fan fail, HDD, Link |
| Number of fans | 2 fan(s) |
| Noise level | 21.3 dB |
| Data transfer rate | 6 Gbit/s |
| Power source type | AC |
| AC adapter frequency | 50/60 Hz |
| AC adapter input voltage | 100 - 240 V |
| Cables included | AC, MiniSAS |
| USB connectivity | No |
| Storage temperature (T-T) | -20 - 70 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 5 - 95 % |
| Harmonized System (HS) code | 84733080 |
Weight and Dimensions| Depth | 279.6 mm |
|---|---|
| Width | 329.3 mm |
| Height | 188.2 mm |
| Weight | 6170 g |
Steps to install 3.5-inch HDDs into the drive bay.
Steps to install 2.5-inch HDDs or SSDs into the drive bay.
Procedure for inserting prepared drive trays into the JBOD enclosure.
Remove the case cover of the PC or QNAP NAS for expansion card installation.
Install the QXP expansion adapter into the host system using appropriate brackets.
Connect the JBOD unit to a PC or QNAP NAS and power it on.
Install QNAP JBOD Manager for Windows or Linux Ubuntu.
Integrate JBOD with QNAP NAS using QTS Storage & Snapshots.
Overview of TL-D800S rear panel controls and connectivity ports.
Overview of TL-D400S front/rear panels and connectivity ports.
Important notice that all drive data is cleared upon SSD/HDD initialization.
Access the QNAP Download Center for additional guides and utilities.
Information on FCC, CE, WEEE, RoHS compliance, and essential safety precautions.
