EasyManua.ls Logo

QNAP TS-x64 - User Manual

QNAP TS-x64
79 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
TS-x62, TS-x64
TS-262
TS-462
TS-264
TS-464
TS-664
User Guide
Document Version: 3
25/08/2022

Table of Contents

Questions and Answers

  • E
    Eric HensonAug 8, 2025
    What to do if QNAP TS-x64 Storage drive failed?
    • L
      lisa64Aug 8, 2025
      To replace a failed drive on your QNAP storage, log on to QTS and go to Main Menu > Storage & Snapshots > Storage > Disks/VJBOD to locate the failed drive. Prepare a new hard drive with the same or larger capacity. Remove the failed drive from the device, wait for 20 seconds or until you hear two beeps, then remove it from the tray. Insert the new drive into the tray and install it. After two beeps, go to Main Menu > Storage & Snapshots > Storage > Storage/Snapshots, find the volume with the new drive, and check that the status is Rebuilding.
  • P
    Paul BentonAug 23, 2025
    How to fix QNAP Storage if Qfinder Pro can't find NAS during QTS installation?
    • N
      nealwandaAug 23, 2025
      If Qfinder Pro or myQNAPcloud can't find your QNAP NAS during QTS installation, the drives or data may be faulty. Power off the NAS, remove all drives, then power it back on. Use Qfinder Pro or myQNAPcloud to locate the NAS. After locating it, reinsert the drives and continue with the QTS installation.

Summary

Product Overview

Hardware Specifications

Details the hardware specifications of the TS-x62 and TS-x64 NAS models.

Components Overview

Safety Information

Provides essential safety instructions for operating and handling the NAS device.

Installation Requirements

Lists the necessary environmental and hardware prerequisites for NAS installation.

Installation and Configuration

Hardware Installation

Details the process of installing hardware components into the NAS.

Drive Installation

Provides instructions for installing various types of drives into the NAS.

Replacing Memory Modules (TS-462, TS-464, TS-664)

Installing Expansion Cards

Expansion Unit Installation

QTS Installation

Explains the methods for installing the QTS operating system on the NAS.

Installing QTS Using Qfinder Pro

Step-by-step guide for installing QTS using the Qfinder Pro utility.

Basic Operations

Power Button

Reset Button

NAS Migration

Troubleshooting

Hot-swapping Failed Drives

Recovering Unintentionally Removed Hard Drives

QNAP TS-x64 Specifications

General IconGeneral
SSD Cache Acceleration SupportYes
Form FactorTower
CPU Architecturex86
GPUIntel UHD Graphics
Flash Memory4 GB eMMC
Drive Compatibility3.5" SATA HDD, 2.5" SATA HDD/SSD
M.2 Slot2 x M.2 2280 PCIe Gen3 x1
USB 3.2 Gen 2 (10Gbps) Port2
HDMI Output1 x HDMI 2.0
LED IndicatorsPower, Status, LAN, USB, HDD
ButtonsPower, Reset
Operating Temperature0 - 40 °C (32°F - 104°F)
Relative Humidity5% to 95% non-condensing
PCIe Slot1 x PCIe Gen3 x2
Operating SystemQTS

Related product manuals