EasyManuals Logo

QNAP TS-1279U-RP User Manual

QNAP TS-1279U-RP
135 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
10
Safety Warnings
1. The NAS can operate normally in the temperature range of 0ºC–40ºC (or up to 35ºC
depending on individual product specifications) with a relative humidity of 0%95%.
Ensure that the environment is well-ventilated.
2. The power cord and devices connected to the NAS must provide correct supply voltage
(100W, 90264V).
3. Do not place the NAS in direct sunlight or near chemicals. Make sure the temperature
and humidity of the environment are in optimized level.
4. Unplug the power cord and all connected cables before cleaning. Wipe the NAS with a
dry towel. Do not use chemical or aerosol to clean the NAS.
5. Do not place any objects on the NAS for the server’s normal operation and to avoid
overheat.
6. Use the flat head screws in the product package to lock the hard disks in the NAS when
installing hard disks for proper operation.
7. Do not place the NAS near any liquid.
8. Do not place the NAS on any uneven surface to avoid falling off and damage.
9. Make sure the voltage is correct in the location where the NAS is installed. Contact the
distributor or the local power supply company for the information.
10. Do not place any object on the power cord.
11. Do not attempt to repair the NAS in any occasions. Improper disassembly of the
product may expose the users to electric shock or other risks. For any enquiries,
please contact the distributor.
12. The chassis NAS models should only be installed in the server room and maintained by
the authorized server manager or IT administrator. The server room is locked by key or
keycard access and only certified staff is allowed to enter the server room.
Warning:
Danger of explosion if battery is incorrectly replaced. Replace only with the same or
equivalent type recommended by the manufacturer. Dispose of used batteries
according to the manufacturer’s instructions.
Do NOT touch the fan inside the system to avoid serious injuries.

Table of Contents

Other manuals for QNAP TS-1279U-RP

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the QNAP TS-1279U-RP and is the answer not in the manual?

QNAP TS-1279U-RP Specifications

General IconGeneral
RAID levels1, 5, 6, 10, JBOD
Storage drive size2.5/3.5 \
Hot-swap drive baysYes
Storage drive capacity0 GB
Supported file systemsext3, ext4, FAT32, HFS+, NTFS
Storage drive interfaceSerial ATA
Total installed storage capacity0 TB
Maximum supported storage capacity36 TB
Number of storage drives installed0
Number of storage drives supported12
Flash memory512 MB
Internal memory2 GB
Internal memory typeDDR3
Maximum RAM supported4 GB
Tcase69.1 °C
Bus typeDMI
L3 cache3 MB
Processor cores2
Processor modeli3-2120
System bus rate5 GT/s
Processor familyIntel® Core™ i3
Processor socketLGA 1155 (Socket H2)
Processor threads4
Processor codenameSandy Bridge
Processor frequency3.3 GHz
Processor cache typeSmart Cache
Processor lithography32 nm
Processor manufacturerIntel
Processor package size37.5 x 37.5 mm
Conflict-Free processorNo
Processor front side bus- MHz
PCI Express slots version2.0
Processor operating modes64-bit
Thermal Design Power (TDP)65 W
On-board graphics card modelIntel® HD Graphics 2000
Number of processors installed1
CPU multiplier (bus/core ratio)33
Memory bandwidth supported by processor (max)21 GB/s
Maximum internal memory supported by processor32 GB
Cabling technology10/100/1000Base-T(X)
Maximum data transfer rate1000 Mbit/s
Supported network protocolsCIFS/SMB, AFP (3.2), NFS(v3), FTP, HTTP, HTTPS, Telnet, SSH, iSCSI, SNMP, SMTP, SMSC
Compliance industry standardsIEEE 802.3ad
Fan60 mm
Processor ARK ID53426
Dimensions (WxDxH)439 x 520 x 88 mm
Power requirements100 - 240 VAC, 50/60Hz
Networking featuresGigabit Ethernet
Compatible operating systemsMicrosoft Windows XP, Vista (32/64-bit), Windows 7 (32/64-bit), Server 2003/2008 R2, Apple Mac OS X, Linux, UNIX
Noise level54.6 dB
Security algorithms256-bit AES, FIPS 140-2, SSH, SSL/TLS
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Chassis typeRack (2U)
Product colorBlack
LED indicatorsHDD, LAN, Status
Number of fans3 fan(s)
Power consumption (sleep)68 W
Power consumption (typical)165 W
Power supply unit (PSU) capacity600 W
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)0 - 90 %
Maximum number of PCI Express lanes16
Memory channels supported by processorDual
Intel Identity Protection Technology version1.00
On-board graphics card ID0x102
On-board graphics card base frequency850 MHz
On-board graphics card dynamic frequency (max)1100 MHz
Weight and Dimensions IconWeight and Dimensions
Weight15880 g

Related product manuals