What to do if Qfinder Pro or myQNAPcloud cannot locate QNAP TS-130 Network Storage Server during QTS installation?
If Qfinder Pro or myQNAPcloud cannot locate the QNAP Network Storage Server during QTS installation, it may indicate faulty drives or data. Power off the NAS, remove all drives, power it back on, locate it using Qfinder Pro or myQNAPcloud, reinsert the drives, and then continue with the QTS installation.
General| RAID support | - |
|---|---|
| Hot-swap drive bays | Yes |
| Storage drive capacity | 0 GB |
| Supported file systems | FAT32, HFS+, NTFS, ext3, ext4 |
| Storage drive interface | Serial ATA II, Serial ATA III |
| Storage drives installed | No |
| Storage drive sizes supported | 2.5, 3.5 \ |
| Supported storage drive types | HDD & SSD |
| Total installed storage capacity | 0 TB |
| Number of storage drives installed | 0 |
| Number of storage drives supported | 1 |
| Processor cores | 4 |
| Processor model | RTD1295 |
| Processor frequency | 1.4 GHz |
| Processor manufacturer | Realtek |
| Flash memory | 4000 MB |
| Internal memory | 1 GB |
| Internal memory type | DDR4 |
| Ethernet LAN data rates | 1000 Mbit/s |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Chassis type | Tower |
| Cooling type | Active |
| Fan diameter | 50 mm |
| Product color | White |
| LED indicators | HDD, LAN, Status, System |
| Number of fans | 1 fan(s) |
| Type | NAS |
| Noise level | 15.2 dB |
| Device class | Home & Home Office |
| Operating system version | 5.0.0 |
| Operating system installed | QNAP QTS |
| Mac operating systems supported | Mac OS X 10.10 Yosemite, Mac OS X 10.11 El Capitan, Mac OS X 10.12 Sierra, Mac OS X 10.13 High Sierra, Mac OS X 10.14 Mojave, Mac OS X 10.7 Lion, Mac OS X 10.8 Mountain Lion, Mac OS X 10.9 Mavericks |
| Server operating systems supported | Windows Server 2003, Windows Server 2008 R2, Windows Server 2012, Windows Server 2012 R2, Windows Server 2016 |
| Windows operating systems supported | Windows 10, Windows 7, Windows 8 |
| Fan voltage | 12 V |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power supply location | External |
| Power consumption (typical) | 7.29 W |
| Power consumption (HDD standby) | - W |
| Power supply unit (PSU) capacity | 36 W |
| Cables included | AC, LAN (RJ-45) |
| Storage temperature (T-T) | -20 - 70 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 5 - 95 % |
| Harmonized System (HS) code | 84714100 |
Weight and Dimensions| Depth | 157.6 mm |
|---|---|
| Width | 66.1 mm |
| Height | 187.5 mm |
| Weight | 610 g |
| Package weight | 1220 g |
Details the technical specifications of the TS-130, including CPU, memory, storage, and dimensions.
General safety guidelines for device operation, handling, and ESD precautions.
Safety precautions related to the power connection and electrical shock risks.
General overview of drive installation for the TS-130.
Step-by-step guide for installing 3.5-inch hard drives into the TS-130.
Step-by-step guide for installing 2.5-inch drives (HDD/SSD) into the TS-130.
Guide for installing QTS using the Qfinder Pro utility on a local network.
To Next Page
